Smart House

Details

Last Updated: 29 May 2014

Hits: 8889

The switchboard is used for switching on/off the AC network 220v load in remote or difficult to access rooms. The switchboard consists of six sockets, each with its individual control. The loads switching on/off is controlled by sending SMSs or calling to the built-in GSM module of the switchboard.

Read more: 3-Channel GSM Socket (Rebooter)

Details

Last Updated: 29 May 2014

Hits: 29055

The commutator usefull for remote switching on/off devices connected to AC 220 V power source in difficult of access or remote locations. Commutator includes 6 outlets, each controlled separately. Each outlet on/off controled by sending SMS-message or by calling to included GSM-module.

Read more: GSM-rebooter

Details

Last Updated: 29 May 2014

Hits: 12176

Transit Gsm-rebooter. Rebooter allows to controll 6 separate power supply circuts. This is usefull for remote controll of various devices and rebooting/resetting devices powered through UPS.

Read more: Transit GSM-rebooter

Details

Last Updated: 06 November 2012

Hits: 8619

This DIN rail mounted unit controls six channels (0 to 5) 110...220V/50Hz via GSM network (calls, SMSs) and takes the readings of external transmitters. For communication with the owner, GSM network (calls, SMSs) is used.

---

For control, the relay with normally closed and normally opened contacts connected to the input switched terminal blocks are used. As the unit is connected to 220V/50Hz main power source, the default voltage is supplied to the normally opened contacts. By GSM commands (SMSs, calls), every channel or all the channels together may be deactivated and reactivated or reset (deactivation for the time divisible by 60 seconds). Depending on the command format (acknowledged or not), the SMS command acknowledgment may be sent. By status request, the SMS enlisting the channels that are currently activated or deactivated and describing the transmitters status is sent.